• Tel: 020 8961 4545
Hello Guest!
Your Cart 0
£0.00

DeVilbiss GTi PRO LITE TE10 Gravity Spray Gun Blue 1.2 & 1.3mm Tip

DeVilbiss GTi PRO LITE TE10 Gravity Spray Gun Blue 1.2 & 1.3mm Tip

In stock
SKU
PROLT-GTE10-1213BU
£407.99 £339.99

Description

GTi Pro Lite Gravity Feed Spray Gun

 

Part No

PROLT-GTE10-1213BU

 

Air cap

TE10

(PLEASE SEE BELOW FOR AIR CAP OVERVIEWS)

 

Fluid Tip/s

1.3mm & Spare 1.2mm

 

Colour

BLUE

Details

Description

GTi Pro Lite Gravity Feed Spray Gun

 

Part No

PROLT-GTE10-1213BU

 

Air cap

TE10

(PLEASE SEE BELOW FOR AIR CAP OVERVIEWS)

 

Fluid Tip/s

1.3mm & Spare 1.2mm

 

Colour

BLUE

 

Features

A lightweight DeVilbiss spray gun developed for busy professional painters needing theultimate in quality finishes.

 

Range of four advanced technology air caps (one HVLP and three High Efficiency) for optimumapplication performance with the latest solvent and waterborne coatings.

 

Ergonomic gun body design with even better fit and balance for comfort and control.

 

Three high efficiency fluid tips provide superb versatility across a range of climatic conditions and viscosities.

 

Coaxial, low kick air valve design gives smoother feel for even greater air and paintcontrol for ease of fade-outs and blend-ins.

 

Technical Information

Cup Capacity - 560 mls

Weight (gun only) - 446 gms

Weight (gun & cup) - 629 gms

Air Cap - Plated Brass

Air Cap Retaining Ring - Clear Anodised aluminium

Fluid Tips - Stainless Steel

Fluid Needle - Stainless Steel

Air Inlet Thread - 1/4” Universal

 

GTi Pro Lite overview:

Aircaps for Clear and Base in Comparison

 

A common question: What is the difference between the TE10, TE20, HV25, HV30 and T110 air caps of the Devilbiss GTi Pro & Pro Lite spray gun.

 

Here an overview (from our point of view and after several discussions with painters)

 

Air Cap TE10 – basecoat & all rounder

Application: Standard water and solvent base basecoats, Air dry and MS clearcoats

Performance Data: Spray Pattern: 290-310 mm (11-12″)

Air Flow (@ 2bar): 280 lpm (9.9 cfm)

Comments: Slower than TE20

 

Air Cap TE20 – clearcoat with faster flow

Application: Clearcoats (especially HS and UHS clearcoats) Recommended for polyurethane clear coats (in combination with 1.3mm nozzle)

Performance: Spray Pattern: 285-300 mm (11-12″)

Air Flow (@ 2bar): 350 lpm (12.4 cfm)

Comments: Faster than TE10

In connection with 1.3mm nozzle widely recommended for 2K gloss / clearcoat

 

Air Cap HV25 – compliant atomizing technology meets HVL

Application: Higher solid clearcoats, solvent and waterborne basecoats

Performance: Spray Pattern: 305-320mm (12.2-12.9″)

Air Flow (@2bar): 350 lpm (12.4 cfm)

 

Air Cap HV30 – maximum transfer efficiency

Application: water base basecoat and clear coat

Performance: Spray Pattern: 300-325mm (12-13″)

Air Flow (@2bar): 460 lpm (16.3 cfm)

 

Air Cap T110 – clear coats with higher solids

Application: clearcoats (with higher solids)

Performance: Spray Pattern: 260-290 mm (10-11″)

Air Flow (@2bar): 265 lpm (9.4 cfm)

Comments: Glass finishing

The most “forgiving” air cap

 

What are the recommended air pressures for the air caps?

The air pressure depends on different factors, e.g. the fluid to be sprayed or whether the fluid control is full open or not. A good starting point are following pressure settings:

HV25/30 Air cap/s: 1.5 – 1.75 bar (22-25 PSI)

TE10/20, T110 Air cap/s: 1.5 – 2 bar (22-29 PSI

More Information

More Information
Brand DeVilbiss